Year | Citation |
---|---|
2020 | Mahbub, P., Noori, A., Parry, J. S., Davis, J., Lucieer, A., & Macka, M. (201001). Continuous and real-time indoor and outdoor methane sensing with portable optical sensor using rapidly pulsed IR LEDs. Talanta, 218 |
2020 | Mahbub, P., & Macka, M. (200801). Radiometric characterisation of light sources used in analytical chemistry - A review. Analytica Chimica Acta, 1123 (113-127). |
2019 | Islam, M. A., Koreshkova, A. N., Gupta, V., Lewis, T., Macka, M., Paull, B., & Mahbub, P. (191220). Fast pulsed amperometric waveform for miniaturised flow-through electrochemical detection: Application in monitoring graphene oxide reduction. Electrochimica Acta, 328 |
2019 | Mahbub, P., & Sharma, A. (191201). Investigation of alternative water sources for fish farming using life cycle costing approach: A case study in North West Tasmania. Journal of Hydrology, 579 |
2019 | Noori, A., Mahbub, P., Parry, J. S., Davis, J., Lucieer, A., & Macka, M. (191101). Portable device for continuous sensing with rapidly pulsed LEDs - Part 1: Rapid on-the-fly processing of large data streams using an open source microcontroller with field programmable gate array. Measurement: Journal of the International Measurement Confederation, 146 (749-757). |
2019 | Islam, M. A., Atia, M. A., Macka, M., Paull, B., & Mahbub, P. (190920). Electrochemical characterisation of nanoparticulate zirconium dioxide-on-gold electrode for electrochemical detection in flow-based analytical systems. Electrochimica Acta, 318 (61-68). |
2019 | Islam, M. A., Lam, S. C., Li, Y., Atia, M. A., Mahbub, P., Nesterenko, P. N., Paull, B., & Macka, M. (190420). Capillary gap flow cell as capillary-end electrochemical detector in flow-based analysis. Electrochimica Acta, 303 (85-93). |
2019 | Islam, M. A., Mahbub, P., Nesterenko, P. N., Paull, B., & Macka, M. (190404). Prospects of pulsed amperometric detection in flow-based analytical systems - A review. Analytica Chimica Acta, 1052 (10-26). |
2018 | Noori, A., Mahbub, P., Dvoak, M., Lucieer, A., & Macka, M. (180601). Radiometric analysis of UV to near infrared LEDs for optical sensing and radiometric measurements in photochemical systems. Sensors and Actuators, B: Chemical, 262 (171-179). |
2018 | Mahbub, P., Leis, J., & Macka, M. (180515). Chemometric Approach to the Calibration of Light Emitting Diode Based Optical Gas Sensors Using High-Resolution Transmission Molecular Absorption Data. Analytical Chemistry, 90(10), (5973-5976). |
Key details
Areas of expertise
- Environmental engineering
- Flow-based applications in analytical chemistry
- Chemical engineering
- Scalable reactor technology
- Spectroscopic and electrochemical sensor technology
Available to supervise research students
Available for media queries
About Parvez Mahbub
Parvez completed his PhD in environmental engineering from QUT Brisbane in 2011 and received post-doctoral training at Australian Centre for Research on Separation Science at UTAS Hobart. His principal research aim is to develop low-cost and portable solutions using advanced analytical techniques and to incorporate such solutions within food, agriculture, defence and medical sciences areas.
His research interests include:
- advanced oxidation processes for sustainable remediation of contaminants
- continuous-flow reactor technology
- contaminant fate
- chemometrics
- UV-visible-infrared spectrophotometry with LEDs for environmental hazard monitoring
- water-quality engineering.
Current research projects
- Advanced Oxidation Techniques for Microbial Remediation in Industrial Scale (Industry Partner: Huon Aquaculture Pty Ltd and Food Innovation Australia Ltd)- $200,000
- Detection and Remediation of Organic Peroxide Explosives Using Advanced Light Sources (Defence Science Institute, Australia) - $15,000
Current research interests
- Upscaling and downscaling of continuous-flow based reactors for industrial applications
- Development of low-cost and portable gas sensors using spectroscopic technologies for indoor and outdoor use
Qualifications
- PhD (Environmental Engineering), Queensland University of Technology, Australia, 2011
Key publications
Parvez has over 22 publications, with a selection listed here.
A more comprehensive list of Parvez's publications is available in the VU Research Repository.
Journal article (showing 10 of 22)
Research funding for the past 5 years
Please note:
- Funding is ordered by the year the project commenced and may continue over several years.
- Funding amounts for contact research are not disclosed to maintain commercial confidentiality.
- The order of investigators is not indicative of the role they played in the research project.
2020
Rapid Screening of Home-Made Explosives in Public Places using Safe Light Source
From: Defence Science Institute
For period: 2020-2021
|
$44,570 |
2019
Peroxide-Based Sustainable Treatment of Salmonid Aquaculture
From: Enterprise Solutions Centre Program
Other investigators: Aspr Thomas Yeager
For period: 2019-2020
|
Not disclosed |
Supervision of research students at VU
Available to supervise research students
Available for media queries
Other supervision of research students
Teaching activities & experience
Parvez undertook lecture, and sessional classes in Solid Mechanics Unit (NEC 2102) at VU from 02/2019 to 12/2019.
Parvez undertook sessional classes in Australian Engineering Practice (ENEG 20001) and Sustainability Studio (ENEG 20003) at Central Queensland University (CQU) at Melbourne campus from 22/03/2018 to 31/12/2020. In 2019, he received an excellence in teaching award in ENEG 20003 at CQU.
Awards
Year | Award |
---|---|
2019 |
Excellence in teaching award - Central Queensland University |
2015 |
Law and Order Innovations: Politics, Governance and Security category - INNOVATIVE TASMANIA AWARDS |
Professional memberships
- Professional member, Institute of Engineers Australia